specification 15-24 watts ? output voltages from 3- 48 vdc available ? non-standard outputs ? universal input ? +70 o operating temperature ? high efficiency - up to 85% ? class 1 earthing ? non-standard connectors available aeh series input input voltage ? 90-264 vac input frequency ? 47-63 hz input cur rent ? 0.4 a for aeh15, at 230 vac 0.7 a for aeh24, at 230 vac inr ush cur rent ? 15/30 a max at 115/230 v ac 100% load, cold start ear th leakage cur r ent ? <0.5 ma max at 115 v ac/60hz <0.75 ma max at 230 vac/50hz output output voltage ? see tables (factory set). non-standard voltages available - contact sales initial set accuracy ? 5% start up delay ? 2 s max hold up time ? 20 ms min at full load and 115 vac line regulation ? see tables load regulation ? see tables transient response ? 4% max. deviation, recovery to within 1% in 500 ? for a 25% load change ripple & noise ? 2% pk-pk, 20 mhz bw overvoltage protection ? 112-132% vnom, auto reset overload pr otection ? 112-132% of nominal, auto r ecover y temperature ? ?.04% /?c max coefficient x ppower.com general ef ficiency ? up to 85% isolation ? 3000 vac input to output 1500 vac input to ground 500 vac output to ground mtbf ? 100 khrs per mil-hdbk-217f environmental operating temperature ? 0 ?c to +70 ?c, derate linearly from full load at +40 ?c to half load at +70 ?c operating humidity ? 5-95 % rh, non-condensing storage temperature ? -40 ?c to +85 ?c v ibration ? 2 g on 3 axes emc & safety emissions ? en55022 level b, conducted and radiated har monic currents ? en61000-3-2, class a voltage flicker ? en61000-3-3 esd immunity ? en61000-4-2, level 2 per f criteria a radiated immunity ? en61000-4-3, level 3 perf criteria a eft/burst ? en61000-4-4, level 2 perf criteria a sur ge ? en61000-4-5, level 3 perf criteria a conducted immunity ? en61000-4-6, level 2 perf criteria a dips & interruptions ? en61000-4-11 30% 10 ms, 60% 100 ms, 100% 5000 ms perf criteria a, b, b safety approvals ? en60950, ul60950, csa c22.2 no. 950 per cul, ul60950 a c - d c
mechanical details aeh 08-nov-07 a c - d c models and ratings output power output voltage nominal ( 1) output current total regulation ( 2) model number minimum maximum 8.25 w 3.3 v 0.0 a 2.50 a 7% aeh15us03 12.00 w 5.0 v 0.0 a 2.40 a 5% aeh15us05 12.00 w 7.0 v 0.0 a 1.70 a 5% aeh15us07 15.00 w 10.0 v 0.0 a 1.50 a 5% aeh15us10 15.00 w 12.0 v 0.0 a 1.25 a 5% aeh15us12 15.00 w 15.0 v 0.0 a 1.00 a 5% AEH15US15 15.00 w 18.0 v 0.0 a 0.80 a 5% aeh15us18 15.00 w 24.0 v 0.0 a 0.62 a 5% aeh15us24 15.00 w 30.0 v 0.0 a 0.50 a 5% aeh15us30 15.00 w 36.0 v 0.0 a 0.40 a 3% aeh15us36 15.00 w 48.0 v 0.0 a 0.30 a 3% aeh15us48 notes 1 . factory-set non-standard outputs available in single output versions. 2. total regulation includes initial set accuracy, line and load regulation. models and ratings output power output voltage nominal (1) output current total regulation (2) model number minimum maximum 15.00 w 5.0 v 0.0 a 3.00 a 5% aeh24us05 20.00 w 7.0 v 0.0 a 2.80 a 5% aeh24us07 22.00 w 10.0 v 0.0 a 2.20 a 5% aeh24us10 24.00 w 12.0 v 0.0 a 2.00 a 5% aeh24us12 24.00 w 15.0 v 0.0 a 1.60 a 5% aeh24us15 24.00 w 18.0 v 0.0 a 1.30 a 5% aeh24us18 24.00 w 24.0 v 0.0 a 1.00 a 3% aeh24us24 24.00 w 30.0 v 0.0 a 0.80 a 3% aeh24us30 24.00 w 36.0 v 0.0 a 0.66 a 3% aeh24us36 24.00 w 48.0 v 0.0 a 0.50 a 2% aeh24us48 notes 1. factory-set non-standard outputs available in single output versions. 2. total regulation includes initial set accuracy, line and load regulation. mechanical details notes 1. dimensions shown in inches (mm). 2. tolerance 0.02 (0.5) max. 3. output connector is 5.5mm outer diameter barrel. inner diameter is 2.5mm with centr e positive (+) and outer shell negative (-). 4. output cable length is 72.0 (1830). 5. optional output connectors available. contact sales of fice. 6. weight 0.3 lb (135 g) approx. 7. for uk mains lead order part: uk-mains-iec. for european mains lead order part: eu-mains-iec. notes 1. dimensions shown in inches (mm). 2. tolerance 0.02 (0.5) max. 3. output connector is 5.5mm outer diameter bar r el. inner diameter is 2.5mm with centre positive (+) and outer shell negative (-). 4. output cable length is 72.0 (1830). 5. optional output connectors available. contact sales office. 6. weight 0.47 lb (215 g) approx. 7. for uk mains lead or der part: uk-mains-iec. for european mains lead order part: eu-mains-iec. 1.42 ( 36.0) a c input ie c 320 inlet 1.5 (38.0) 3.58 (91.0) 1.18 (30.0) ac i nput iec 320 inlet 2.56 (65.0) 4.17 (106.0)
|
